Protect valuable fine solids
Record the range and variation that the filter must receive, including upset conditions.
Ore-specific concentrate filtration
Copper Concentrate Dewatering with Vacuum Disc Filters
Assess vacuum or ceramic disc filtration for copper concentrate moisture, valuable-fines retention, filtrate clarity and continuous plant production.
Concentrate moisture controlDuty
Representative slurryFeed basis
Filterability testKey evidence
Project-specific sizingFinal selection
Duty definitionFeed Product Operation
Start with the Feed, Product and Water Balance
Copper concentrate economics place extra weight on solids retention and reliable sampling. Media selection must consider both cake performance and valuable solids in the filtrate. The engineering review connects feed preparation, filtration, filtrate handling and cake discharge to one measurable duty.
Control moisture for downstream handling
Define the measurable outcome and the downstream reason it matters.
Account for flotation reagents
Confirm how the circuit will be started, controlled, cleaned and maintained.
Selection boundary
Copper concentrate economics place extra weight on solids retention and reliable sampling. Media selection must consider both cake performance and valuable solids in the filtrate.
Engineering sequence1 2 3 4 5
Build the Dewatering Duty Before Selecting the Machine
A defensible selection follows the material through the circuit and keeps every assumption visible.
Collect feed data
Sample normal and difficult campaigns; record solids, PSD, mineralogy, pH, temperature and reagents.
Define acceptance
Set moisture, solids-retention and filtrate criteria before testing.
Run testwork
Measure cake formation, drying response, release and filtrate quality with candidate media.
Calculate area
Use tested dry-solids flux, operating hours, availability and design margin.
Confirm system
Review vacuum, filtrate, blowback, feed, discharge, access, controls and utilities.
Required project evidence
Inputs That Control Filterability and Sizing
The same headline tonnage can require very different filtration areas when the feed or target changes.
Feed solids rangeNormal, minimum and maximum concentration after thickening.
Full particle distributionInclude ultrafines and clay information where available.
Mineralogy and chemistryIdentify changing ore domains and relevant process reagents.
Required dry throughputNormal, design and peak tonnes per hour with operating schedule.
Cake storage and downstream useDescribe the receiving equipment and acceptable handling behavior.
Utilities and elevationState power, water, compressed air, site elevation and ambient range.
Equipment route
Compare All Disc FiltersCompare the Filter Medium and System Boundary
Compare candidate equipment using the same copper concentrate dewatering sample and the same acceptance criteria.
PG vacuum disc filter
Replaceable cloth and broad configuration options for suitable continuous duties.
Review PG SeriesTP energy-saving disc filter
Evaluate where long operating hours make vacuum-system efficiency commercially important.
Review TP SeriesBY ceramic disc filter
Compare ceramic media when fine-particle retention and cloth-free operation fit the feed.
Review BY SeriesContinue the selection path
Continue the Concentrate Design Path
Use these pages to test assumptions and move from application context to a defined equipment duty.
Practical answers
Frequently Asked Questions
Use these answers to prepare a useful discussion with BOYUN. Final equipment selection still depends on project data.
Why is representative slurry data required?
Mineral names do not define filterability. Particle-size distribution, mineralogy, clay, reagent chemistry, feed solids and temperature can change cake formation, permeability and release. Use the filterability test process when performance is commercially important.
What information should be sent for a preliminary review?
Provide duty, mineral, dry throughput, feed solids, particle size or P80, target moisture, operating hours, elevation and available utilities through the disc filter quote page.
Does BOYUN guarantee cake moisture from a mineral name?
No. A responsible target must be tied to representative feed data, test conditions and an agreed equipment and operating basis.
Define the Next Engineering Step
Share the slurry, dry throughput, feed solids, particle size and target cake moisture. BOYUN will identify missing data and recommend testing, sizing or a suitable filter configuration.